It is currently 29 Mar 2024, 13:21
Roll up, roll up. Here you will find everything from new workshop designs, through builds to completed workshop tours. All magnificently overseen by our own Mike G and his tremendously thorough 'Shed' design and generous advice.
by MJOriginals » 02 Jun 2019, 13:48
Hi all
I am trying to set up a small down fraught table for sanding small pieces but if I use my current extractor it’s pretty noisy I was wondering if anybody has experience of a quiet extractor that would suit
Martyn
MJOriginals
-
MJOriginals
- Seedling
-
- Posts: 44
- Joined: 01 Dec 2018, 12:56
- Location: Polmont,Falkirk, Scotland
- Name: Martyn
-
by Andyp » 02 Jun 2019, 14:07
For quite and plenty of suckage I would not hesitate to recommend one of the NVQ range by Numatic.
I have had one for 15+ years and it is quite. I have it attached to the Kapex mitre saw and comes on automatically, if I remember to switch it on. It is quieter than the Kapex, only when the dust starts flying to I realise it has not come on.
Something like this
https://www.greenandwhite.co.uk/Numatic ... 900345.htm
I do not think therefore I do not am.
cheers
Andy
-
Andyp
- Petrified Pine
-
- Posts: 11722
- Joined: 22 Jul 2014, 07:05
- Location: 14860 Normandy, France
- Name: Andy
by MJOriginals » 02 Jun 2019, 14:51
Sorry just read the post again phone did autocorrect yet again
It was a down draught table
Martyn
-
MJOriginals
- Seedling
-
- Posts: 44
- Joined: 01 Dec 2018, 12:56
- Location: Polmont,Falkirk, Scotland
- Name: Martyn
-
by MJOriginals » 02 Jun 2019, 19:49
Hi Andy
Thanks I’ll see if I can find some noise level figured for those and compare my current scheppach is 80 dBa and the best I have found so far is one st 67dBa so about 6 times quieter but I’m still looking
Thanks again for your help
Martyn
-
MJOriginals
- Seedling
-
- Posts: 44
- Joined: 01 Dec 2018, 12:56
- Location: Polmont,Falkirk, Scotland
- Name: Martyn
-
by Andyp » 03 Jun 2019, 06:21
I cant find any DB ratings for mine. I can put an app on my phone and measure myself if you can give me a few days.
I do not think therefore I do not am.
cheers
Andy
-
Andyp
- Petrified Pine
-
- Posts: 11722
- Joined: 22 Jul 2014, 07:05
- Location: 14860 Normandy, France
- Name: Andy
Return to Workshop Builds
Who is online
Users browsing this forum: Bing [Bot] and 6 guests