It is currently 28 Mar 2024, 23:48

Small workshop

Roll up, roll up. Here you will find everything from new workshop designs, through builds to completed workshop tours. All magnificently overseen by our own Mike G and his tremendously thorough 'Shed' design and generous advice.

Re: Small workshop

Postby DaveL » 29 Nov 2018, 01:34

I wish you speedy recovery.

The DVD by DaveR is great, I go back to it on a regular basis. I bought it as a download which means no waiting for the postal service and no import duty
Regards,
Dave
My tool kit is almost complete, only a few more to get.
User avatar
DaveL
Old Oak
 
Posts: 1918
Joined: 21 Jul 2014, 21:07
Location: Sudbury, Suffolk
Name: Dave

Re: Small workshop

Postby MY63 » 29 Nov 2018, 08:37

Thanks for the good wishes.
The download of DaveRs dvd sounds like what i need is there a link here.
MY63
Old Oak
 
Posts: 1248
Joined: 17 Oct 2018, 20:41
Location: North East England
Name: Michael

Re: Small workshop

Postby RogerS » 29 Nov 2018, 09:25

MY63 wrote:Thanks for the good wishes.
The download of DaveRs dvd sounds like what i need is there a link here.



Here you go, Michael

https://www.finewoodworking.com/2012/03 ... the-basics
If opportunity doesn't knock, build a door.
User avatar
RogerS
Petrified Pine
 
Posts: 13291
Joined: 21 Jul 2014, 21:07
Location: Nearly finished. OK OK...call me Pinocchio.
Name:

Re: Small workshop

Postby Woolf » 29 Nov 2018, 11:17

Any idea of how big the download file is?
Woolf
Seedling
 
Posts: 27
Joined: 16 Jan 2015, 23:15
Location: Johannesburg
Name: Woolf

Re: Small workshop

Postby RogerS » 29 Nov 2018, 11:28

Woolf wrote:Any idea of how big the download file is?


Sorry, no idea. If you're bandwidth constrained then there is always the DVD
If opportunity doesn't knock, build a door.
User avatar
RogerS
Petrified Pine
 
Posts: 13291
Joined: 21 Jul 2014, 21:07
Location: Nearly finished. OK OK...call me Pinocchio.
Name:

Re: Small workshop

Postby Andyp » 29 Nov 2018, 14:40

Hope your hand gets batter soon and that you do nort end up working outdoors in the worst of the winter weather.
I do not think therefore I do not am.

cheers
Andy
User avatar
Andyp
Petrified Pine
 
Posts: 11718
Joined: 22 Jul 2014, 07:05
Location: 14860 Normandy, France
Name: Andy

Re: Small workshop

Postby MY63 » 29 Nov 2018, 23:26

Thanks for the messages very much appreciated all went well with the hand surgery I now have a huge comedy arrow on my index finger.

Image2018-11-29_10-18-40 by my0771, on Flickr

Stitches out in 10 days
MY63
Old Oak
 
Posts: 1248
Joined: 17 Oct 2018, 20:41
Location: North East England
Name: Michael

Re: Small workshop

Postby RogerS » 30 Nov 2018, 13:36

That arrow reminds me of my mate's when he had his op on his left leg. He got his wife to write in indelible ink on the right leg...'Not this one, the OTHER One'.

It is scary though. When I had my second cataract operation (right eye this time) just before I went into theatre I went through the formal consent process with one of the nurses. "OK...let's see..you're down for a cataract operation on your left eye". :o
If opportunity doesn't knock, build a door.
User avatar
RogerS
Petrified Pine
 
Posts: 13291
Joined: 21 Jul 2014, 21:07
Location: Nearly finished. OK OK...call me Pinocchio.
Name:

Re: Small workshop

Postby DaveL » 30 Nov 2018, 15:25

Oh yes, I had big arrows on my leg when they were operating to stabilise the lose bit of bone which I'd broken of the tibia.
Regards,
Dave
My tool kit is almost complete, only a few more to get.
User avatar
DaveL
Old Oak
 
Posts: 1918
Joined: 21 Jul 2014, 21:07
Location: Sudbury, Suffolk
Name: Dave

Re: Small workshop

Postby Malc2098 » 30 Nov 2018, 15:59

All these arrows, but where are the cowboys?!!
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: Small workshop

Postby 9fingers » 30 Nov 2018, 16:23

Malc2098 wrote:All these arrows, but where are the cowboys?!!


Not working in the NHS thats for sure! Excellent people.

SWMBO has had 20 significant operations on toes, ankles knees, fingers wrists shoulder and eyes each time they have added the arrows and about half the time (I think) deliberately run through the consent form saying the wrong side. I think is is an attempt at humour and making sure the patient is paying attention.
Her last job was to fuse the top 5 section of her spine. That had no left-right ambiguity and so the only job so far not to get arrows.
I keep telling here she is worth her weight in scrap titanium but she just gives me strange looks :lol:

Bob
Information on induction motors here
https://drive.google.com/file/d/1dBTVXx ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Petrified Pine
 
Posts: 10038
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

Re: Small workshop

Postby MY63 » 01 Dec 2018, 16:24

Thanks I am pretty sure my right hand must be into double figures for surgery over the years and although my life changing accident occurred during surgery. Causing some legal issues which took 5 years to sort I bear them no ill will. I have done some work with this hospital in recent years.

Hey look what showed up today.

Image2018-12-01_03-14-36 by my0771, on Flickr

At least once I am ready my hands will be warm and dry. My stitches are due out in 10 days the surgeon told me I could take them out myself and he added a blue stitch at the end of his modified blanket stitch. So I would know which one to cut if they were causing me irritation.
That's why he wears one of my hand made leather belts :D
MY63
Old Oak
 
Posts: 1248
Joined: 17 Oct 2018, 20:41
Location: North East England
Name: Michael

Re: Small workshop

Postby Rod » 02 Dec 2018, 00:22

Hope the healing process goes well.

I’ve got three permanent markers - tiny tattoos used as aiming points for radiotherapy.
For my major surgery I was marked all over my thighs and stomach by the plastic surgeon indicating possible donor locations.

Rod
User avatar
Rod
Old Oak
 
Posts: 4471
Joined: 21 Jul 2014, 21:34
Location: Winchester, Hampshire
Name:

Re: Small workshop

Postby MY63 » 05 Dec 2018, 22:05

Rod my surgery is quite minor compared to yours.
The big dressing was causing some issues with my arm today so I removed it the small opsite dressing had curled up inside so I replaced that.
Both sides of the wound are together and all looks really well I have more movement than I have had for many years.
MY63
Old Oak
 
Posts: 1248
Joined: 17 Oct 2018, 20:41
Location: North East England
Name: Michael

Re: Small workshop

Postby Rod » 06 Dec 2018, 01:00

Nice to hear it’s healing well.

My big op wasn’t entirely successful so I’m down for a much smaller one - only 2 to 3hrs this time. The last one took 23hrs.
Parts of me to be frozen by a new process of Cryoablation!

Rod
User avatar
Rod
Old Oak
 
Posts: 4471
Joined: 21 Jul 2014, 21:34
Location: Winchester, Hampshire
Name:

Re: Small workshop

Postby MY63 » 06 Dec 2018, 08:47

Thankfully I am not in that league, I was in and out of theatre within an hour. I hope your upcoming surgery goes well.
MY63
Old Oak
 
Posts: 1248
Joined: 17 Oct 2018, 20:41
Location: North East England
Name: Michael

Re: Small workshop

Postby MY63 » 06 Dec 2018, 17:58

I am trying to get my head around what is required for a double apex roof I am in the process of re reading threads to gather as much information as possible.
I have made a rough drawing to assist with ordering I think it will be the new year before I place my timber order now. But this should allow me enough time to get my planning right before I start.

Image2018-12-06_02-22-56 by my0771, on Flickr

I will work out the detail of the roof as my plans progress my aim being to get as much headroom as possible but have a finished product that looks good.
I did manage to get two trenches dug and filled with stone before the heavy rain and my surgery interrupted.
Any input appreciated.
MY63
Old Oak
 
Posts: 1248
Joined: 17 Oct 2018, 20:41
Location: North East England
Name: Michael

Re: Small workshop

Postby Mike G » 06 Dec 2018, 18:51

What are you planning to put on the roof?
User avatar
Mike G
Sequoia
 
Posts: 9834
Joined: 30 Jul 2014, 22:36
Location: Suffolk
Name:

Re: Small workshop

Postby MY63 » 06 Dec 2018, 19:25

My current plan is for an EDPM covering
MY63
Old Oak
 
Posts: 1248
Joined: 17 Oct 2018, 20:41
Location: North East England
Name: Michael

Re: Small workshop

Postby 9fingers » 06 Dec 2018, 20:00

Normally such a roof would have joists at wall plate level or partway up pitched rafters and a ridge board.
However with such a very low pitch you might get away with overlapping rafter pairs alone bolted is several place where they meet?

Bob
Information on induction motors here
https://drive.google.com/file/d/1dBTVXx ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Petrified Pine
 
Posts: 10038
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

Re: Small workshop

Postby MY63 » 06 Dec 2018, 22:29

9fingers wrote:Normally such a roof would have joists at wall plate level or partway up pitched rafters and a ridge board.
However with such a very low pitch you might get away with overlapping rafter pairs alone bolted is several place where they meet?

Bob


Thanks Bob.
I think I understand that rather than having joists running from wall to wall. Each rafter would go from the wall plate on one side and be bolted to its pair from the wall on the other side.
I plan to use OSB3 11 mm inside and 18 mm under the EDPM.
MY63
Old Oak
 
Posts: 1248
Joined: 17 Oct 2018, 20:41
Location: North East England
Name: Michael

Re: Small workshop

Postby 9fingers » 06 Dec 2018, 22:46

Yes that is what I'm visualising.

Scaling off your drawing it looks like the rafters are inclined by 50-75mm along their length of about 1.3-1.4 m
Putting in a rafter as well would likely mean the top of the rafter would be height than the rafter.
Drawing out a detail section should show the problem.

Several bolts per rafter pair with serrated lock washers in between the rafters should be plenty strong enough and the decking and ceiling OSB should hold the rafter pairs at the rigth spacing making the ridge board redundant.
I'd only suggest this for such a low pitch which gives lots of overlap area in combination with such short rafters for your 2.4 m width.

Bob
Information on induction motors here
https://drive.google.com/file/d/1dBTVXx ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Petrified Pine
 
Posts: 10038
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

Re: Small workshop

Postby SamQ aka Ah! Q! » 06 Dec 2018, 23:00

Hi Michael, just sent you a PM.
Sam.
A pragmatist inside a perpetual optimist, heavily influenced by an experienced cynic, wrapped around by an aging relic.
SamQ aka Ah! Q!
Old Oak
 
Posts: 1030
Joined: 21 Jul 2014, 23:06
Location: High above the Aln.
Name: Sam

Re: Small workshop

Postby MY63 » 06 Dec 2018, 23:25

Hi Sam I have replied.

Thanks Bob
I am sorry I am not sure that I understand do you mean the joist would be redundant as it would take the same space as the rafter. Or am I on the wrong track all together.
I may have to make the rafters longer as I have not allowed for the air gap and outer feather edge boards so to get a 150 mm overhang.
Thanks
Michael
MY63
Old Oak
 
Posts: 1248
Joined: 17 Oct 2018, 20:41
Location: North East England
Name: Michael

Re: Small workshop

Postby 9fingers » 06 Dec 2018, 23:32

I think you have the right idea. Drawing it out will show it .
Only the rafter length from apex to wall plate is relevant to the strength. Any overhang is just "hanging" there. :D

Bob
Information on induction motors here
https://drive.google.com/file/d/1dBTVXx ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Petrified Pine
 
Posts: 10038
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

PreviousNext

Return to Workshop Builds

Who is online

Users browsing this forum: No registered users and 10 guests