• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Latest activity

  • P
    PAC1 replied to the thread Shaker oval boxes.
    The boxes are very small 7” on the long axis. Everything I read said 1/16th but it is too thick. The dots you can see are dowels not pins.
  • P
    PAC1 replied to the thread Shaker oval boxes.
    Steve, a consistent 3mm would be fantastic at the moment. The saw is capable of it but I need to get the set up right. I am getting...
  • AndyP
    AndyP replied to the thread Shaker oval boxes.
    What is the wood. It looks as if it has been hit all over with a punch.
  • AndyP
    AndyP replied to the thread Makerfield.
    I expect the loser will be well and truly brassed off.
  • E
    Eric the Viking replied to the thread Shaker oval boxes.
    I love the birdseyes, and the copper pins, too (proper job!). I'm surprised that 1/8" is too thick for steaming, as I'm fairly sure the...
  • E
    Eric the Viking reacted to PAC1's post in the thread Shaker oval boxes with Like Like.
    As part of my plans to do small manageable projects whilst I recover are Shaker oval boxes. So I made some patterns and then had a go:
  • Steve Maskery
    Steve Maskery replied to the thread Shaker oval boxes.
    Can you get a 1tpi blade for your saw? 1/2" sounds about right, but I'd say that 3tpi is bit on the fine side for deep ripping., or...
  • CHJ
    CHJ replied to the thread Makerfield.
    I suppose some will say that it was a pivotable event, all being firmly Pinned down and Knuckles wrapped.
  • AndyT
    AndyT reacted to PAC1's post in the thread Shaker oval boxes with Thanks Thanks.
    The strips were band sawn to as thin as I could get them, thicknessed to as thin as I dared (tear out);and then drum sanded to 1/16th...
  • P
    PAC1 replied to the thread Shaker oval boxes.
    The strips were band sawn to as thin as I could get them, thicknessed to as thin as I dared (tear out);and then drum sanded to 1/16th...
  • D
    duke reacted to PAC1's post in the thread Shaker oval boxes with Like Like.
    What I have learned is that the sides need to be thinner and I need to wrap the side tighter around the former. I also need smaller...
  • D
    Much to my surprise, the 'ad hoc' router jig for use on the ci table: ...worked an absolute treat! I had to think about it a lot...
  • Malc2098
    Malc2098 reacted to PAC1's post in the thread Shaker oval boxes with Like Like.
    As part of my plans to do small manageable projects whilst I recover are Shaker oval boxes. So I made some patterns and then had a go:
  • Windows
    Windows reacted to RogerM's post in the thread Makerfield with Like Like.
    At the first sign of trouble they'll fold :rolleyes:
  • RogerM
    RogerM replied to the thread Makerfield.
    At the first sign of trouble they'll fold :rolleyes:
Back
Top