• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Search results

  1. Windows

    Terminology - Two countries, separated by a common language

    Two-by-four 2 x 4 vs four-by-two 4 x 2 ? Nail punch vs nail set?
  2. Windows

    Terminology - Two countries, separated by a common language

    American: Double-hung window Other: sash window
  3. Windows

    Secondary glazing

    Good advice. I have knives. I should use them.
  4. Windows

    Secondary glazing

    Just saw this video of sash making with a bridle joint. Not the same design as I’m doing this time since I’m doing full mortices, but thought I’d throw the link in here:
  5. Windows

    Wedged M&Ts

    Yeah 1 mm is a lot. Let’s say it’s 0.4 mm or 0.3 mm. Sounds like you have low tolerance for defects at this stage. You’d check the stock and the mortice/tenon then and eliminate the issue before going further?
  6. Windows

    Wedged M&Ts

    So say you’re at the stage where you’ve cut the straight mortice and tenon and you’re doing a dry fit, how do you decide whether a problem is going to be fixed by adjusting the M&T versus some other fix? What level of perfection do you expect at each stage? For example, suppose at the dry fit...
  7. Windows

    Secondary glazing

    So I think I’m going to put this one aside for now with no further changes and mark and cut the remaining mortices in the same way as I did this one (using the glass area as the reference, not the outside edge). I’m not going to update any calculations/drawings at this point - that will...
  8. Windows

    Secondary glazing

    Worked it out: I laid out based on the most important measurement being the interior opening size (based on the idea that I could order glass ahead of time - which I didn’t do in the end). The interior size is spot on. The rails are under sized. The meat beyond the rebate is supposed to be 35 mm...
  9. Windows

    Secondary glazing

    Thanks Andy. I marked up in pairs as you describe from face & edge (only one set of stiles so far though) - except I used a mechanical pencil, not a knife. For the stiles, I possibly miscalculated or misread a number. Something silly. I'll work out exactly what tomorrow. For the rails, I think...
  10. Windows

    Secondary glazing

    I’ve mostly got one casement with simple (non-wedged) M&Ts cut & dry fit. Still a bit of adjustment to do, but it goes together so I thought I’d check exterior dimensions. I’m going for 468 x 1013 mm, but I’ve only got 465 x 1007 mm and this may shrink a fraction as I adjust the M&Ts for a...
  11. Windows

    Secondary glazing

    I’ve done a couple of mortices using plunge router & chisel. In the process of adjusting the fit, I could see that the rebate wasn’t full depth so used the router to put the rebate right. I think if I was more prone to panic, I could have made things a lot worse. The initial fit was terrible -...
  12. Windows

    Lost! Now found.

    Thanks. Weird that I couldn’t see it before. Probably my mistake.
  13. Windows

    Lost! Now found.

    I like the Presch combi too (and the Workpro is good too). Are there other metric-only combis? Have to be a bit careful if you try to get a metric-only Workpro combi - the only version of it I’ve seen is the combined set of 150mm & 300mm; if you get separately, you get a metric+imperial blade. I...
  14. Windows

    Lost! Now found.

    Recent video about the BMI rule: I almost ordered the 2m version from the tape store, but it’s not the metric-only version.
  15. Windows

    Secondary glazing

    The marking up on the tenons was done quickly and I didn’t worry too much about complete lines because only the shoulders were final positions cut by the saw. The other lines were really just guides for off-the-line hand sawing - the final dimensions were provided by the depth stop of the router...
  16. Windows

    Secondary glazing

  17. Windows

    Lost! Now found.

    Can I get a @Dr.Al critique on these metric-only combination squares’ rulers please: Everyone else please chip in your comments too.
  18. Windows

    Recovering from an op- ideas of what to do?

    I once had an op after which the nurses were worried that I wasn’t waking up properly. They called the doctor to take a look. “How many times have you pressed this button?” he asked me pointing at the PCA machine. I told him. “You must be in quite a lot of pain”, he said. “Oh no”, said I, “they...
  19. Windows

    Festool TS55 lock washer problem

    With no rattle, I’d be looking further afield with a magnet first.
  20. Windows

    Festool TS55 lock washer problem

    Does it rattle when you shake it?
Back
Top