• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Bit of a long stot - Unistrut

TrimTheKing":2ijtvezt said:
Hasn't Steve M been given loads of it? More than he needs iirc...

Cheers
Mark
Click to expand...

Thanks Mark,

Not sure if his was stainless but I've posted on UKW as well so hopefully he might see it.

Funny how "proper" stuff like this does not seem to come up on Cyber Monday deals! :lol:

Bob
 
TrimTheKing":740elgzi said:
Hasn't Steve M been given loads of it? More than he needs iirc...

Cheers
Mark
Click to expand...


Don't bank on it!

We started with the Unistrut. We've cocked up a bit here. I have seven 3m lengths. I should have cut one into three and then worked out how to put two lengths and a piece up to the ceiling. Instead we put two lengths up, one at each end, and then a filler piece between them. But that filler piece is more than 1m so I have a piece left of about 18" or so and a gap in the center of about 1.3m. So if anyone has a bit of Unistrut that you don't want, send it along to me, will you please?
 
RogerS":2ec255wi said:
TrimTheKing":2ec255wi said:
Hasn't Steve M been given loads of it? More than he needs iirc...

Cheers
Mark
Click to expand...


Don't bank on it!

We started with the Unistrut. We've cocked up a bit here. I have seven 3m lengths. I should have cut one into three and then worked out how to put two lengths and a piece up to the ceiling. Instead we put two lengths up, one at each end, and then a filler piece between them. But that filler piece is more than 1m so I have a piece left of about 18" or so and a gap in the center of about 1.3m. So if anyone has a bit of Unistrut that you don't want, send it along to me, will you please?
Click to expand...


Ah bugger.

Cheers
Mark
 
tracerman":30x9u74p said:
Bob , you probably know this , but for metal of all types , I go see the Metal Supermarket people at Mount Pleasant Ind Est , Northam , Southampton .

Steve
Click to expand...


Yes Thanks I do use metal supermarket even though they are expensive.
Unistrut is not a raw material but a preformed channel intended for cable and duct management.
I want it as a rail for a external sliding door hence the need for stainless steel.

Bob
 
You must log in or register to reply here.
Back
Top