• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Cufflink Box

Woodbloke

Sequoia
Joined
Jul 22, 2014
Messages
7,531
Reaction score
1,655
Location
Salisbury, UK
I made this a while ago using the last fragments of my 'waterfall elm'. It's a small cufflink box to hold a half dozen pairs:

IMG_1116.jpg

Construction is fairly conventional, being through dovetails with a large centre pin where the lid was sawn off on the bandsaw. There's also a solid 8mm top panel and the base is veneered in the same elm; no handle has been fitted but instead a small chamfer has been worked onto the front edge:

IMG_1118.jpg

The lining was made from a small part of my stash of Bog Oak, 5300yo and was particularly irksome to make as the internal sections had to be cross-halved, then inserted from the underside into the housings in the side linings.

IMG_1117.jpg

Hinges were from Ian Hawthorne and proved quite tricky to fit as the box sides are 12mm thick and the hinges are 8mm..not a lot of material to play with:

IMG_1119.jpg

Finish is a couple of coats of satin Osmo PolyX with some Swedish beeswax over the top - Rob
 
I thought I’d seen it before but then I thought this was another one [emoji3]
What’s with the Swedish wax?

Rod
 
Rod":d9im172s said:
That’s on a par with Alfie Shine - £9.50 for a tiny tin.
Got good reviews though.

Rod
That stuff is insane!...I tried to persuade Jim to let me have a tin for a trial, but stoney ground :( - Rob
 
You just re-posted that to get into the Old Oak club. :) :)

Still cant understand why anyone would wear cufflinks these days.
 
Andyp":3ln4yr5f said:
Still cant understand why anyone would wear cufflinks these days.
Agreed, but very occasionally I go 'suited n'booted' and get out one of my double cuffed shirts where a set of links looks proper. Quite often you see folk on the telly who wear a suit with shirt button cuffs which looks hideous...BoJo being a prime example. Trump, for all his faults manages to look respectable with his cufflinked shirts, despite wearing his tie about 150mm too long, but at least he knows how to do a decent Windsor knot - Rob
 
Beautiful box. I particularly like that you have aligned the screws all the same way.

Sent from my Moto G (4) using Tapatalk
 
Andyp":44rg39pq said:
You just re-posted that to get into the Old Oak club. :) :)

Still cant understand why anyone would wear cufflinks these days.
Any time I wear a shirt that can take cufflinks, I wear cufflinks, I have lots of them.
 
DaveL":1zw34r2b said:
Any time I wear a shirt that can take cufflinks, I wear cufflinks, I have lots of them.

I always roll single cuff shirts sleeves up to the elbow, regardless if I'm wearing a pully or jacket - Rob
 
Woodbloke":1jai0fli said:
DaveL":1jai0fli said:
Any time I wear a shirt that can take cufflinks, I wear cufflinks, I have lots of them.

I always roll single cuff shirts sleeves up to the elbow, regardless if I'm wearing a pully or jacket - Rob


I just went the route of buying short sleeve shirts for summer and winter for work.Then we could wear golf shirts. :D


BTW nice box, good work.
 
Back
Top