• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Garden Arbour/Windbreak, Finished

techauthorbob":1x6bp28l said:
It's sure looking good!

Very satisfying type of project this, I did a simple one years ago in a suntrap corner and it really breaks up a plain decking area, I made the top pieces too thin and one or two have warped, so will have to correct them or replace.

One thing for it that I am contemplating is a sort of horizontal blind on top with some type of (camouflage?) netting to break up the hot sun ( yes, we do occasionally get some in Yorkshire) to pull out if needed.

This all reminds me of the Scarborough gift shop owner who, when a customer said "do you have a windbreak?" replied " windbreak son, I don't even have time for a tea Break!".

Bob

It is on the west end of a south facing terrace so no need for shade. A climbing rose was planted in the autumn which we hope to train up either side of the fence panels and along the top.
 
Thanks for the comments guys. For the observant ones amongst you I have tapped that roof board so that it lines up with both posts. They are only resting there while I await longer stainless screws.

805FF115-B65A-4F45-B3EC-B0E0A0473E29.jpeg

Satisfied? :)
 
Andyp":2sb4368x said:
Wabi sabi Mark ;)
“nothing lasts, nothing is finished, and nothing is perfect”

Seeking perfection...

tea-bowl-tokyo-national-museum-big.jpg
...in the imperfect. Antique tea ceremony raku bowls like this are worth a fortune :shock: - Rob
 
Andyp":3ezxqdgj said:
.......For the observant ones amongst you I have tapped that roof board so that it lines up with both posts.........

Phew! I wouldn't have slept...... :lol:

Satisfied? :)

Very. Looks great, Andy.
 
Thanks.
I might get it finished at the weekend but very busy around here over the next couple of days.
 
Finally got the last panels treated and fitted. Also had to cut the curve in the ends of the two roof beams as I had left them square and I knew you lot would not like that. Roof boards all now screwed and checked for square. :)

CDFF9D49-1BA0-475B-B39E-67FC104F11B6.jpeg

EF676691-9E40-4529-9464-2E7E75B4D624.jpeg

B4FD158D-7F53-4EE9-8C55-299AB503EDCD.jpeg

The trellis I made by ripping the slats from the old fence panel.

Just have to train the rose, half up the outside, half up the inside then along the top.
 
Very nice.

Just thinking it looks like it should do more than be a windbreak....it's too good! Needs a couple of bench seats built between the trellis panels and some cushions scattered around maybe :)
 
Thanks Malc,

Thanks Robert, the missus wants some large trough like planters of the faux stone variety. The table is normally at that end of the terrace and it can get very windy. I also have a weather vane to install and I might resurrect some hanging baskets that have been languishing in the barn for 12 years.
 
Robert":9uqnmjc2 said:
Very nice.

Just thinking it looks like it should do more than be a windbreak....it's too good! Needs a couple of bench seats built between the trellis panels and some cushions scattered around maybe :)

Nice job Andy and I agree with Robert...a couple of bench seats in there would work a treat. On the other hand, SWIMBO had other ideas :D - Rob
 
Andyp":2r507agj said:
RogerM":2r507agj said:
Looking good Andy. I'm liking that scarf joint!

Woodbloke":2r507agj said:
RogerM":2r507agj said:
Looking good Andy. I'm liking that scarf joint!
Same here Rog, very oriental :D - Rob

Thanks. It really is very tight and strong even with those slight gaps. Although getting the wedges the right height so that they fit snuggly bit don't force the joint apart is critical.
I now have to work up the courage to make one where the two pieces to be joined are 2.4m long.
I learned from a YouTube video recently that using the material that the wedge will be cut from, as your making template when you mark up the scarf joint, means the wedge thickness will be perfect.

Sent from my SM-G973F using Tapatalk
 
Woodbloke":2wkcl3w4 said:
Robert":2wkcl3w4 said:
Very nice.

Just thinking it looks like it should do more than be a windbreak....it's too good! Needs a couple of bench seats built between the trellis panels and some cushions scattered around maybe :)

Nice job Andy and I agree with Robert...a couple of bench seats in there would work a treat. On the other hand, SWIMBO had other ideas :D - Rob

Guys, stop it. I do not want to make a bench seat. :) I know what you mean though, there are plenty of examples on interweb of seats within an arbour. We discussed it about a year ago and decided against. Like most examples of the fairer sex she could always change her mind.
 
Back
Top